This page is a Work In Process. If you can contribute your knowledge, we would be pleased to have your help.

OpenWrt 21.02.0 has many important features that make it worthwhile (or even important!) to upgrade to this new version. Before you upgrade, you should be aware of a number of criteria:

  • OpenWrt 21.02.0 requires 8 MB Flash/64 MB RAM. To see if your device can support 21.02.0, enter your device's brand/model in the table below and check the Flash and RAM columns.
  • Direct sysupgrade from 18.06 (or earlier) to 21.02 is not supported. To upgrade, you should backup your configuration, install 21.02.0, and then manually re-create your configuration.
  • As always, make a backup of your configuration before proceeding.
  • If your router currently runs 19.07, in many cases, you can upgrade to 21.02.0 using either the LuCI web GUI (keeping configuration) or sysupgrade from the command line.
  • However, there is no “keep-configuration” migration path from 19.07 to 21.02 for targets that switched from swconfig to DSA. The affected targets are: ath79 (only TP-Link TL-WR941ND), bcm4908, gemini, kirkwood, mediatek (most boards), mvebu, octeon, ramips (mt7621 subtarget only), and realtek. Check the Target column in the table below. If your device is listed, check its Device Page (link in the table below) or ask on the Forum.
  • Don't worry - If you try to upgrade with the wrong target, sysupgrade will refuse to proceed with an error message like this:
    Image version mismatch. image 1.1 device 1.0 Please wipe config during upgrade (force required) or reinstall. Config cannot be migrated from swconfig to DSA Image check failed
  • The default root file system partition size changed for targets/devices relying on booting from mass storage (HDD, USB flash, SD card, etc.), so MBR will change and any additional partition will be deleted when sysupgrading.
  • If your device cannot be upgraded automatically, but it will support OpenWrt 21.02.0, you should backup your configuration, install manually, then re-create your configuration. As always if you have questions, feel free to ask on the Forum.

That's it! Good luck with OpenWrt 21.02.0!

Enter your device's Brand or Model below to see its characteristics.

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/12 11:43
  • by 127.0.0.1