Show pagesourceOld revisionsBacklinksBack to top × JBoot web recovery Recovery can be done via JBoot web recovery. Push and hold the reset button and turn on the power. Wait until LED start blinking (~10sec.) Upload ...factory.bin image via JBOOT http (IP: 192.168.123.254) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is the name of the firmware file. Devices with this recovery method ↓ BrandModelVersionSupported Current RelRecovery method(s)Comment recoveryDevice PageDevice Techdata D-LinkDIR-510LA123.05.0JBoot web recoverydir-510l_a1View/Edit dataD-LinkDWR-116A1, A222.03.5JBoot web recoverydwr-116View/Edit dataD-LinkDWR-118A123.05.0JBoot web recovery, see devicepage, see git-commitdwr-118View/Edit dataD-LinkDWR-512B22.03.5JBoot web recovery, see devicepagedwr-512_bView/Edit dataD-LinkDWR-921C123.05.0JBoot web recoverydwr-921View/Edit dataD-LinkDWR-921C323.05.0JBoot web recoverydwr-921View/Edit dataD-LinkDWR-922E223.05.0D-Link Recovery GUI, JBoot web recovery, see git-commitdwr-922_e2View/Edit dataD-LinkDWR-96023.05.0JBoot web recoverydwr-960View/Edit dataD-LinkDWR-961A123.05.0JBoot web recovery, see git-commitView/Edit dataLavaLR-25G00123.05.0JBoot web recovery, see git-commitView/Edit data This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies Last modified: 2019/09/14 05:08by tmomas