User Tools

Site Tools


docs:guide-user:installation:openwrt_x86

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
docs:guide-user:installation:openwrt_x86 [2018/05/13 10:20]
bobafetthotmail [OpenWrt on x86 compatible systems] typo
docs:guide-user:installation:openwrt_x86 [2018/08/27 06:09] (current)
vgaetera [Using usb sticks with internet] add archive extract command
Line 45: Line 45:
     - clean the internal disk from partition (''​fdisk /​dev/​sda''​ and then delete all the partitions and after that write the new partition table)     - clean the internal disk from partition (''​fdisk /​dev/​sda''​ and then delete all the partitions and after that write the new partition table)
     - mounting the second usb stick with the OpenWrt image (for example ''​mount /dev/sdc1 /​mnt/''​)     - mounting the second usb stick with the OpenWrt image (for example ''​mount /dev/sdc1 /​mnt/''​)
-    - Getting the image on the /tmp/ directory of the linux rescue system and writing it on the internal disk. (this is the annoying part because if there is no browser you need to type a long url, and two sticks avoid problems). For example ''​cd /tmp/ ; wget http://​downloads.openwrt.org/​backfire/​10.03.1/​x86_generic/​openwrt-x86-generic-rootfs-ext2.img.gz''​+    - Getting the image on the /tmp/ directory of the linux rescue system and writing it on the internal disk. (this is the annoying part because if there is no browser you need to type a long url, and two sticks avoid problems). For example ''​cd /tmp/; wget http://​downloads.openwrt.org/​backfire/​10.03.1/​x86_generic/​openwrt-x86-generic-rootfs-ext2.img.gz;​ gzip -d openwrt-x86-generic-rootfs-ext2.img.gz''​
     - In the case work on the downloaded image (that yould require to be unzipped, for example)     - In the case work on the downloaded image (that yould require to be unzipped, for example)
     - writing the image on the disk (for example: ''​dd if=/​mnt/​openwrt-x86-generic-combined-squashfs.img of=/​dev/​sda''​)     - writing the image on the disk (for example: ''​dd if=/​mnt/​openwrt-x86-generic-combined-squashfs.img of=/​dev/​sda''​)
docs/guide-user/installation/openwrt_x86.1526206833.txt.gz · Last modified: 2018/05/13 10:20 by bobafetthotmail