Show pagesourceOld revisionsBacklinksBack to top × JBoot web recovery Installation can be done via JBoot web recovery. Push and hold the reset button and turn on the power. Wait until LED start blinking (~10sec.) Upload ...factory.bin image via JBOOT http (IP: 192.168.123.254) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is the name of the firmware file. Devices with this installation method ↓ BrandModelVersionSupported Current RelInstallation method(s)Comment installationDevice PageDevice Techdata D-LinkDIR-510LA122.03.5JBoot web recoverydir-510l_a1View/Edit dataD-LinkDWR-116A1, A222.03.5GUI generic, JBoot web recoverydwr-116View/Edit dataD-LinkDWR-118A122.03.5GUI OEM, JBoot web recovery, see devicepage, see git-commitdwr-118View/Edit dataD-LinkDWR-512B22.03.5JBoot web recovery, see devicepageBootloader needs to be replaced before installation.dwr-512_bView/Edit dataD-LinkDWR-921C122.03.5GUI OEM, JBoot web recoverydwr-921View/Edit dataD-LinkDWR-921C322.03.5GUI OEM, JBoot web recoverydwr-921View/Edit dataD-LinkDWR-922E222.03.5D-Link Recovery GUI, GUI OEM, JBoot web recovery, see git-commitdwr-922_e2View/Edit dataD-LinkDWR-96022.03.5GUI OEM, JBoot web recoverydwr-960View/Edit dataD-LinkDWR-961A122.03.5GUI OEM, JBoot web recovery, see git-commitView/Edit dataLavaLR-25G00122.03.5GUI OEM, JBoot web recovery, see git-commitView/Edit data This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies Last modified: 2019/09/14 05:06by tmomas