Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
docs:user-guide:generic.flashing.serial [2018/02/17 19:03] – ↷ Page moved from doc:howto:generic.flashing.serial to docs:user-guide:generic.flashing.serial bobafetthotmaildocs:guide-user:installation:generic.flashing.serial [2019/05/30 09:06] jalakas
Line 1: Line 1:
-====== Generic Flashing over the Serial Port ======+====== Generic flashing over the Serial port ======
  
 === Technical references === === Technical references ===
-  * [[doc/hardware/port.serial]] +  * [[docs:techref:hardware:port.serial]] 
-  * Platform //ar71xx// bootloader //[[doc:techref:bootloader:uboot|Das U-Boot]]//: [[toh:tp-link:tl-wr1043nd#installation|TL-WR1043ND]]+  * Platform //ar71xx// bootloader //[[docs:techref:bootloader:uboot|Das U-Boot]]//: [[toh:tp-link:tl-wr1043nd#installation|TL-WR1043ND]]
  
 === Actual procedure === === Actual procedure ===
Line 39: Line 39:
  
 === Kermit === === Kermit ===
-You can use a client using the [[wp>Kermit (protocol)]] to transfer the new image. It may take forever and a half (15-20min) to copy. But it's easier and more secure than running a tftpd server. These instructions assume you're using a Linux system, but they will give you all you need to do the same on a Windows box.+You can use a client using the [[wp>Kermit (protocol)]] to transfer the new image. It may take forever and a half (15-20min) to copy. But it's easier and more secure than running a [[docs:guide-user:troubleshooting:tftpserver|tftpd server]]. These instructions assume you're using a Linux system, but they will give you all you need to do the same on a Windows box.
  
 Requirements:  Requirements: 
  • Last modified: 2022/03/08 11:20
  • by aterik