User Tools

Site Tools

  • As there is no NAT in IPv6, simple 'accept' rules for the needed ports replace the IPv4 port forwarding rules. This example allows incoming traffic to port 113 (identd), which is useful if you use IRC. You might want to delete that line if you have no need for it. Similarly, you can open other ports, if necessary.
# start with a clean slate
ip6tables -F
ip6tables -X

# allow icmpv6
ip6tables -I INPUT -p ipv6-icmp -j ACCEPT
ip6tables -I OUTPUT -p ipv6-icmp -j ACCEPT
ip6tables -I FORWARD -p ipv6-icmp -j ACCEPT

# allow loopback
ip6tables -A INPUT -i lo -j ACCEPT
ip6tables -A OUTPUT -o lo -j ACCEPT

# allow anything out of the tunnel
ip6tables -A OUTPUT -o 6in4-henet -j ACCEPT

# allow LAN
ip6tables -A INPUT -i br-lan -j ACCEPT
ip6tables -A OUTPUT -o br-lan -j ACCEPT

# drop packets with a type 0 routing header
ip6tables -A INPUT -m rt --rt-type 0 -j DROP
ip6tables -A OUTPUT -m rt --rt-type 0 -j DROP
ip6tables -A FORWARD -m rt --rt-type 0 -j DROP

# allow link-local
ip6tables -A INPUT -s fe80::/10 -j ACCEPT
ip6tables -A INPUT -s fe80::/10 -j ACCEPT

# allow multicast
ip6tables -A INPUT -s ff00::/8 -j ACCEPT
ip6tables -A OUTPUT -s ff00::/8 -j ACCEPT

# allow forwarding
ip6tables -A FORWARD -i br-lan -j ACCEPT
ip6tables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT

# forward ident requests
ip6tables -A FORWARD -p tcp --dport 113 -j ACCEPT

# default policy...
ip6tables -P INPUT DROP
ip6tables -P FORWARD DROP
ip6tables -P OUTPUT DROP
docs/guide-user/firewall/netfilter-iptables/netfilter.ip6tables.example1.txt · Last modified: 2018/03/04 16:12 by bobafetthotmail