Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
docs:guide-user:advanced:sysupgrade_extras [2022/11/29 18:11] – [Instructions] vgaeteradocs:guide-user:advanced:sysupgrade_extras [2023/12/01 01:36] – [Instructions] minimize write operations vgaetera
Line 1: Line 1:
 ====== Sysupgrade extras ====== ====== Sysupgrade extras ======
-{{section>meta:infobox:howto_links#cli_skills&noheader&nofooter&noeditbutton}}+{{section>meta:infobox:howto_links#basic_skills&noheader&nofooter&noeditbutton}}
  
 ===== Introduction ===== ===== Introduction =====
Line 7: Line 7:
  
 ===== Features ===== ===== Features =====
-  * Check/download the latest firmware release available.+  * Check the latest firmware release available
 +  * Download the firmware image and verify its checksum.
   * Allow to force/skip upgrade matching the current release.   * Allow to force/skip upgrade matching the current release.
-  * Expand the root partition and filesystem after upgrading.+  * Save/restore the state of enabled/disabled services.
  
 ===== Options ===== ===== Options =====
 ^ Option ^ Description ^ ^ Option ^ Description ^
-| ''**-I**''Initialize Opkg profiles. | +| ''**-A**''Download and upgrade firmware if a newer stable release is available. | 
-| ''**-A**''Upgrade firmware if a newer one is available. | +| ''**-U**''Download and upgrade firmware for the latest stable release. | 
-| ''**-U**''Force firmware upgrade. |+| ''**-S**''Save the current state of enabled/disabled services to UCI. | 
 +| ''**-R**'' | Restore the state of enabled/disabled services. |
  
 ===== Instructions ===== ===== Instructions =====
Line 25: Line 27:
 local SYSUP_CMD="${1}" local SYSUP_CMD="${1}"
 case "${SYSUP_CMD}" in case "${SYSUP_CMD}" in
-(-Iopkg save +(-A|-Usysupgrade_proc "${@}" ;; 
-sysupgrade_init ;; +(-Sservice_save ;; 
-(-A. /etc/openwrt_release +(-Rservice_restore ;;
-sysupgrade_auto ;; +
-(-U) +
-sysupgrade_force ;;+
 (*) command sysupgrade "${@}" ;; (*) command sysupgrade "${@}" ;;
 esac esac
 } }
  
-sysupgrade_init() { +sysupgrade_proc() { 
-uci -q batch << EOI +. /etc/os-release
-set opkg.init='opkg' +
-add_list opkg.init.ipkg='losetup' +
-add_list opkg.init.ipkg='parted' +
-add_list opkg.init.ipkg='resize2fs' +
-commit opkg +
-EOI +
-+
- +
-sysupgrade_auto() {+
 local SYSUP_VER="$(sysupgrade_ver)" local SYSUP_VER="$(sysupgrade_ver)"
 local SYSUP_URL="$(sysupgrade_url)" local SYSUP_URL="$(sysupgrade_url)"
 local SYSUP_REV="$(sysupgrade_rev)" local SYSUP_REV="$(sysupgrade_rev)"
-if [ "${SYSUP_REV}" != "${DISTRIB_REVISION}" ] \ +if [ "${SYSUP_REV}" != "${BUILD_ID}" ] \ 
-|| [ -n "${SYSUP_FORCE}" ] +|| [ "${SYSUP_CMD}" = "-U" ] 
-then+then shift
 local SYSUP_DEV="$(sysupgrade_dev)" local SYSUP_DEV="$(sysupgrade_dev)"
 local SYSUP_PROF="$(sysupgrade_prof)" local SYSUP_PROF="$(sysupgrade_prof)"
 local SYSUP_FS="$(sysupgrade_fs)" local SYSUP_FS="$(sysupgrade_fs)"
 local SYSUP_TYPE="$(sysupgrade_type)" local SYSUP_TYPE="$(sysupgrade_type)"
 +local SYSUP_EFI="$(sysupgrade_efi)"
 local SYSUP_IMG="$(sysupgrade_img)" local SYSUP_IMG="$(sysupgrade_img)"
-uclient-fetch -P /tmp "${SYSUP_URL}/${SYSUP_IMG}" +sysupgrade "${@}" "${SYSUP_URL}/${SYSUP_IMG}"
-case "${SYSUP_IMG}" in +
-(*.gz) gunzip -k /tmp/"${SYSUP_IMG}" ;; +
-esac +
-sysupgrade -i /tmp/"${SYSUP_IMG%.gz}"+
 fi fi
-} 
- 
-sysupgrade_force() { 
-local SYSUP_FORCE="1" 
-sysupgrade -A 
 } }
  
 sysupgrade_ver() { sysupgrade_ver() {
-case "${DISTRIB_RELEASE}" in +case "${VERSION_ID}" in 
-(SNAPSHOT) echo "../snapshots" ;; +(snapshot) echo "../snapshots" ;; 
-(*) uclient-fetch -O - \+(*) wget -O - \
 "https://api.github.com/repos/openwrt/openwrt/tags" \ "https://api.github.com/repos/openwrt/openwrt/tags" \
 | jsonfilter -e "$[*]['name']" \ | jsonfilter -e "$[*]['name']" \
Line 82: Line 64:
 sysupgrade_url() { sysupgrade_url() {
 echo "https://downloads.openwrt.org/\ echo "https://downloads.openwrt.org/\
-releases/${SYSUP_VER}/targets/${DISTRIB_TARGET}"+releases/${SYSUP_VER}/targets/${OPENWRT_BOARD}"
 } }
  
 sysupgrade_rev() { sysupgrade_rev() {
-uclient-fetch -O - "${SYSUP_URL}/version.buildinfo"+wget -O - "${SYSUP_URL}/version.buildinfo"
 } }
  
Line 95: Line 77:
  
 sysupgrade_prof() { sysupgrade_prof() {
-case "${DISTRIB_TARGET}" in +case "${OPENWRT_BOARD}" in 
-(x86*) echo "generic" ;;+(x86/*) echo "generic" ;;
 (*) echo "${SYSUP_DEV//,/_}" ;; (*) echo "${SYSUP_DEV//,/_}" ;;
 esac esac
Line 107: Line 89:
  
 sysupgrade_type() { sysupgrade_type() {
-case "${DISTRIB_TARGET}" in +case "${OPENWRT_BOARD}" in 
-(x86*) echo "combined" ;;+(x86/*) echo "combined" ;;
 (*) echo "sysupgrade" ;; (*) echo "sysupgrade" ;;
 esac esac
 +}
 +
 +sysupgrade_efi() {
 +if [ -d /sys/firmware/efi ]
 +then echo "-efi"
 +fi
 } }
  
 sysupgrade_img() { sysupgrade_img() {
-uclient-fetch -O - "${SYSUP_URL}/profiles.json"+wget -O - "${SYSUP_URL}/profiles.json"
-| jsonfilter -e "$['profiles']['${SYSUP_PROF}']['images']+| jsonfilter -e "$['profiles']['${SYSUP_PROF}'] 
-[@['type']='${SYSUP_TYPE}'&&@['filesystem']='${SYSUP_FS}']+['images'][@['type']='${SYSUP_TYPE}${SYSUP_EFI}' 
-['name']"+&&@['filesystem']='${SYSUP_FS}']['name']" 
 +
 + 
 +service_save() { 
 +local SVC_NAME="$(ls /etc/init.d)" 
 +local SVC_STATE 
 +for SVC_NAME in ${SVC_NAME} 
 +do if command service "${SVC_NAME}" enabled 
 +then SVC_STATE="enable" 
 +else SVC_STATE="disable" 
 +fi 
 +uci -q batch << EOI 
 +set system.service='service' 
 +del_list system.service.enable='${SVC_NAME}' 
 +del_list system.service.disable='${SVC_NAME}' 
 +add_list system.service.'${SVC_STATE}'='${SVC_NAME}' 
 +EOI 
 +done 
 +uci commit system 
 +
 + 
 +service_restore() { 
 +local SVC_NAME 
 +local SVC_STATE="enable disable" 
 +for SVC_STATE in ${SVC_STATE} 
 +do SVC_NAME="$(uci -q get system.service."${SVC_STATE}")" 
 +for SVC_NAME in ${SVC_NAME} 
 +do command service "${SVC_NAME}" "${SVC_STATE}" 
 +done 
 +done
 } }
 EOF EOF
 . /etc/profile.d/sysupgrade.sh . /etc/profile.d/sysupgrade.sh
  
-# Configure uci-defaults +# Configure startup scripts 
-cat << "EOF" > /etc/uci-defaults/70-root-resize +cat << "EOF" > /etc/uci-defaults/60-service-restore 
-if [ ! -e /etc/root-resize ] \ +if [ ! -e /etc/service-restore ]
-&& lock -n /var/lock/root-resize \ +
-&& [ -e /etc/opkg-restore-init ]+
 then . /etc/profile.d/sysupgrade.sh then . /etc/profile.d/sysupgrade.sh
-BOOT="$(sed -n -e "\|\s/boot\s.*$|{s///p;q}" /etc/mtab)" +sysupgrade -R 
-DISK="${BOOT%%[0-9]*}" +touch /etc/service-restore
-PART="$((${BOOT##*[^0-9]}+1))" +
-ROOT="${DISK}${PART}" +
-echo "fix" | parted -l ---pretend-input-tty +
-parted -s "${DISK}" resizepart "${PART}" 100% +
-case "$(sysupgrade_fs)" in +
-(ext4) LOOP="$(losetup -f)" +
-losetup "${LOOP}" "${ROOT}" ;; +
-(squashfs) LOOP="$(losetup -n -l \ +
-| sed -n -e "\|\s.*\s${ROOT#/dev}\s.*$|{s///p;q}")" ;; +
-esac +
-resize2fs -f "${LOOP}" +
-touch /etc/root-resize +
-lock -u /var/lock/root-resize+
 fi fi
 exit 1 exit 1
 EOF EOF
 cat << "EOF" >> /etc/sysupgrade.conf cat << "EOF" >> /etc/sysupgrade.conf
-/etc/uci-defaults+/etc/uci-defaults/60-service-restore
 EOF EOF
 </code> </code>
Line 153: Line 155:
 ===== Examples ===== ===== Examples =====
 <code bash> <code bash>
-# Automated Sysupgrade +# Automated interactive Sysupgrade 
-sysupgrade -I +sysupgrade -A -i 
-sysupgrade -A+ 
 +# Forced interactive Sysupgrade 
 +sysupgrade -U -i
 </code> </code>
  
 ===== Automated ===== ===== Automated =====
 <code bash> <code bash>
-uclient-fetch -O sysupgrade-extras.sh "https://openwrt.org/_export/code/docs/guide-user/advanced/sysupgrade_extras?codeblock=0"+wget -U "" -O sysupgrade-extras.sh "https://openwrt.org/_export/code/docs/guide-user/advanced/sysupgrade_extras?codeblock=0"
 . ./sysupgrade-extras.sh . ./sysupgrade-extras.sh
 </code> </code>
  
  • Last modified: 2024/06/12 13:16
  • by vgaetera