Redboot
help
RedBoot> help
Downloads and boots the primary image from flash. If partition name is specified image from that partition will be booted. If -n option is used network iinterface is stopped before booting
Boot [-n] [-p ]
Initializes the flash and creates default Redboot and Appl Image partitions.
FlashInit
Displays status of application images in flash.
DispImageStatus
Downloads the application image from TFTP server, validates it and fuses it in Flash. If Flash paritition name is given then image will be fused in that parition, otherwise the image is fused in appropriate partition having the secondary image.
FuseImage [-p ] [-h ]
Erases the image in the given flash partiton.
EraseImage
Sets the MAC address in to the bootloader configuration in flash.
SetMacAddr [ -p ]
Manage aliases kept in FLASH memory
alias name [value]
Set/Query the system console baud rate
baudrate [-b ]
Check broadcom 53xx
bcmtest
Manage machine caches
cache [ON | OFF]
Display/switch console channel
channel [-1|]
Compute a 32bit checksum [POSIX algorithm] for a range of memory
cksum -b -l
Display (hex dump) a range of memory
dump -b [-l ] [-s] [-1|2|4]
Execute an image - with MMU off
exec [-w timeout] [-b [-l ]]
[-r [-s ]]
[-c "kernel command line"] []
Manage FLASH images
fis {cmds}
Manage configuration kept in FLASH memory
fconfig [-i] [-l] [-n] [-f] [-d] | [-d] nickname [value]
Test the factory reset button on the FVX538 board
polling the status of reset button around 5 seconds
frtest
Restart autonegotiation of Giga port
giga
Execute code at a location
go [-w ] [-n] [entry]
Help about help?
help []
Set/change IP addresses
ip_address [-l ] [-h ]
Test LEDs on the FVX538 board
LED number 0: LAN port DMZ LED
1: RTL8110S Internet connection LED
2: AC101L Internet connection LED
3: System test LED
A comprehensive test is performed if no parameter is specified
ledtest [-g ]
Load a file
load [-r] [-v] [-h ] [-m ] [-c ]
[-b ]
Compare two blocks of memory
mcmp -s -d -l [-1|-2|-4]
Copy memory
mcopy -s -d -l [-1|-2|-4]
Set/Fill memory location(s)
mem [-b ] [-l ] [-1|2|4] [-w]
Apply data bus test, address bus test, and device test on RAM
memtest
Fill a block of memory with a pattern
mfill -b -l -p [-1|-2|-4]
Scans PCI devices and reports findings
pciscan
Converts a virtual to a physical address
physaddr
Network connectivity test
ping [-v] [-n ] [-l ] [-t ] [-r ]
[-i ] -h
Print information about the current settings within the main processor
processor
Reset the system
reset
Show register status related with giga port
showgiga
Display RedBoot version information
version
Converts a physical to a virtual address
virtaddr
Display (hex dump) a range of memory
x -b [-l ] [-s] [-1|2|4]
fis list
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0x50000000 0x50000000 0x00040000 0x00000000
RedBoot config 0x50FC0000 0x50FC0000 0x00001000 0x00000000
FIS directory 0x50FE0000 0x50FE0000 0x00020000 0x00000000
appimg1 0x50040000 0x50040000 0x00780000 0x00000000
appimg2 0x507C0000 0x507C0000 0x00780000 0x00000000
igwpri 0x50F40000 0x50F40000 0x00080000 0x00000000
fconfig -l
RedBoot> fconfig -l
Run script at boot: true
Boot script:
.. boot
Boot script timeout (1000ms resolution): 1
Use BOOTP for network configuration: false
Gateway IP address: 0.0.0.0
Local IP address: 192.168.16.244
Local IP address mask: 255.255.255.0
Product Info: FVX538
Default server IP address: 192.168.16.1
Version Info: 1.0a
Console baud rate: 115200
DNS server IP address: 0.0.0.0
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Default network device: npe_eth0
Network hardware address [MAC] for NPE eth0: 0x00:0x14:0x6C:0xCB:0xXX:0xXX
Network hardware address [MAC] for NPE eth1: 0x00:0x14:0x6C:0xCB:0xXX:0xXX
Network hardware address [MAC] for RTL 8169: 0x00:0x14:0x6C:0xCB:0xXX:0xXX
processor
RedBoot> processor
Processor: Intel StrongARM V5TE XScale Core Rev: 0
IXP4XX 533MHz B0 step
ID = 690541C1 (ex. IXP4XX A0 step = 690541C0)
BIG-ENDIAN operation
Branch Target Buffer ENABLED
Instruction Cache ENABLED
Data Cache ENABLED
MMU ENABLED
Mini-Cache = Write back, Read Allocate
Write Buffer Coalescing ENABLED
pciscan
RedBoot> pciscan
========== Scanning initialized devices
Found device on bus 0, devfn 0x00:
Note that board is active. Probed sizes and CPU addresses invalid!
Vendor 0x8086
Device 0x8500
Command 0x0006, Status 0x02a0
Class/Rev 0x0b400001
Header 0x00
SubVendor 0x0000, Sub ID 0x0000
BAR[0] 0x00000008 / probed size 0x00000000 / CPU addr 0x00000000
BAR[1] 0x01000008 / probed size 0x00000000 / CPU addr 0x01000000
BAR[2] 0x02000008 / probed size 0x00000000 / CPU addr 0x02000000
BAR[3] 0x03000008 / probed size 0x00000000 / CPU addr 0x03000000
BAR[4] 0x80000008 / probed size 0x00000000 / CPU addr 0x80000000
BAR[5] 0x90000001 / probed size 0x00000000 / CPU addr 0x90000000
Wired to HAL vector 7
Found device on bus 0, devfn 0x38:
Note that board is active. Probed sizes and CPU addresses invalid!
Vendor 0x10ec
Device 0x8169
Command 0x0147, Status 0x02b0
Class/Rev 0x02000010
Header 0x00
SubVendor 0x10ec, Sub ID 0x8169
BAR[0] 0x00001801 / probed size 0x00000000 / CPU addr 0x00001800
BAR[1] 0x48020000 / probed size 0x00000000 / CPU addr 0x48020000
BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
Wired to HAL vector 7
Found device on bus 0, devfn 0xa8:
Note that board is active. Probed sizes and CPU addresses invalid!
Vendor 0x177d
Device 0x0003
Command 0x0145, Status 0x02b0
Class/Rev 0x10000000
Header 0x00
SubVendor 0x177d, Sub ID 0x0001
BAR[0] 0x00001001 / probed size 0x00000000 / CPU addr 0x00001000
BAR[1] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[2] 0x00001401 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xffffffff
Wired to HAL vector 7