Table of Contents

Buffalo WHR-300HP2

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details.

This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now.

Supported Versions

Hardware Highlights

Installation

  1. Compile initramfs image
  2. Rename initramfs image to firmware_WHR-300HP2.ram
  3. Setup tftp server at 192.168.11.168
  4. While plugging it in, hold down the AOSS button until you see it grab the image
  5. Load initramfs image via tftp
  6. Backup the stock FW
  7. Sysupgrade with a sysupgrade image for a permanent install

Tags

How to add tags