Table of Contents

Agestar NSB3AS

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

nsb3as_01.jpg

General features:

Supported Versions

Hardware Highlights

Installation

→ Install OpenWrt (generic explanation)

FIXME Please add the installation procedure here.

Hardware

Info

Architecture:
Bootloader: U-Boot
System-On-Chip: CNS2132
CPU Speed: 250 Mhz
Flash-Chip: ST 25P64V6P
Flash size: 8 MiB
RAM-Chip:
RAM size: 32 MiB
Serial: Yes
JTAG: Yes

Photos

nsb3as_01.jpg nsb3as_03.jpg

Opening the case

→ Warranty

Main PCB

Serial

→ port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port (UART) of this specific device:

  [6] [5]
  [ ] [ ]
  [2] [1]

  1 : TX 
  2 : RX
  5 : VCC 3.3V
  6 : GND 

Original Firmware Info

The lastest original firmware (V01R07 at 5/10/2009) can be found Here

Tags