Table of Contents

OpenWrt 25.12.0-rc3 - Third Release Candidate - 24. January 2026

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 25.12.0-rc3, r32486-30527a4c34
 -----------------------------------------------------

The OpenWrt community is proud to announce the third release candidate of the upcoming OpenWrt 25.12 stable series.

This is just a release candidate and not the final release yet.

Download firmware images via the Firmware Selector or directly from our download servers:

An upgrade from OpenWrt 24.10 to OpenWrt 25.12 is supported in many cases with the help of the sysupgrade utility which will also attempt to preserve the configuration. A configuration backup is advised nonetheless when upgrading to OpenWrt 25.12. (see “Upgrading” below).

Please test this version

This is not the final version, this is a test version. Please report problems and bugs in our issue tracker.

About OpenWrt

The OpenWrt Project is a Linux operating system targeting embedded devices. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices. See the Table of Hardware for supported devices. For more information about OpenWrt project organization, see the About OpenWrt pages.

Announcements about new releases and security fixes

Do you want to be informed about important changes such as new releases and security fixes?

We have a new mailing list for this, as well as RSS options: see Important changes and announcements.

Highlights in OpenWrt 25.12

OpenWrt 25.12.0-rc3 incorporates over 4300 commits since branching the previous OpenWrt 24.10 release and has been under development for over one year.

Only the main changes are listed below. See changelog-25.12.0-rc3 for the full changelog.

General changes

The hardware requirements did not change significantly, most devices supported by OpenWrt 24.10 should also work with OpenWrt 25.12.

Switch package manager from opkg to apk

OpenWrt has transitioned from the traditional opkg package manager to apk (Alpine Package Keeper).

This change brings several advantages:

apk supports most features of opkg. Only very few package names changed. The command line arguments of apk are different from the command line arguments of opkg.

For users migrating existing systems, an official opkg-to-apk-cheatsheet is available to ease the transition and map common workflows.

Integration of attended sysupgrade

The attended.sysupgrade LuCI application is now installed by default.

ASU allows devices to:

This dramatically simplifies upgrades: with just a few clicks in LuCI and a short wait, a custom firmware image is built and installed without manual intervention.

Shell history is preserved

Shell command history is now preserved across sessions by storing it in a RAM-backed filesystem.

Benefits:

For users who prefer persistent history storage, this behavior can be changed by editing: /etc/profile.d/busybox-history-file.sh

⚠️ Note: Storing history on flash will increase write cycles and may impact flash endurance over time.

Integration of video feed

The OpenWrt video feed with Qt5 and UI applications is integrated by default.

Wi-Fi scripts in ucode

The wifi scripts were rewritten in ucode.

Target changes

Many new devices added

OpenWrt 25.12 supports over 2180 devices. Support for over 160 new devices was added in addition to the device support by OpenWrt 24.10.

Core components update

Core components have the following versions in 25.12.0-rc3:

In addition to the listed applications, many others were also updated.

Upgrading to 25.12

Upgrading from 24.10 to 25.12 should be transparent on most devices, as most configuration data has either remained the same or will be translated correctly on first boot by the package init scripts.

:!: Sysupgrade from 23.05 to 25.12 is not officially supported.

:!: Cron log level was fixed in busybox. system.@system[0].cronloglevel should be set to 7 for normal logging. 7 is the default now. If this option is not set, the default is used and no manual action is needed. commit

:!: Bananapi BPI-R4: Interfaces eth1 was renamed to sfp-lan or lan4 and the interface eth2 was renamed to sfp-wan to match the labels. You have to upgrade without saving the configuration. commit

Scratch installs/upgrades

If you wish to start from scratch (always the safest, but also the most work), simply download the pre-built image from the downloads site or from the Firmware Selector to your device. Make sure to create and save a backup, then install the image using sysupgrade -n /tmp/firmware.bin or the LuCI Backup/Flash Firmware, being sure to set “Keep settings and retain the current configuration” to its off position. Restore or reconstruct your configuration using the contents of the backup as a template.

Attended Sysupgrade options

Attended Sysupgrade (ASU) allows you to build a custom image that retains all of your installed packages and their configuration transparently. You need to use one of the three ASU clients that interface with the ASU server to produce this custom image:

  1. Firmware Selector - an online builder that requires you to manually supply it with the packages you wish to have installed. This package list is sent to the ASU server, and a new custom device image is created containing those packages. You may then download and install the image in LuCI Backup/Flash Firmware, but for this you would enable “Keep settings...”
  2. Luci Attended Sysupgrade - the web interface to the ASU server. This tool allows you to choose a new OpenWrt version, then collects the names of the packages on your device and sends them up to the ASU server. LuCI ASU then downloads the created image directly to your device and allows you to install it, without having to do any of the bookkeeping tasks involved with using the Firmware Selector.
  3. owut - a command line package that does the same job as LuCI ASU, but provides more diagnostics and better visibility into what's happening at the various steps before and during the build process.

Both the LuCI ASU app and owut are optional packages in 24.10, so if you have not installed them, they won't be there by default. Use either the LuCI Package Manager to install them, or you can do it from the command line with opkg: 

$ opkg update
$ opkg install luci-app-attendedsysupgrade
$ opkg install owut

Note that you can install one or the other, or both together, they are completely independent packages.

Upgrades with Firmware Selector

The Firmware Selector does an excellent job of searching through the thousands of available device configurations and getting you to the right place. But, some devices have several variants and possibly different image formats, so if you're unsure about which one you need or which device you're dealing with or anything else, go to the Firmware Selector support thread and ask away.

Upgrades with LuCI Attended Sysupgrade

The LuCI web interface should be fairly self explanatory. Since you have fairly limited options there that should be pretty obvious, but if anything is unclear or you're unsure about something, go to the LuCI Attended Sysupgrade support thread and ask.

Upgrades with owut

If you choose to use owut, the fact that it's a command line program means you'll need a little more explanation regarding best practices. In any situation, it's always safe to do a check to see what's going on. 

$ owut check --verbose --version-to 25.12
... a lot of output ...

This check should show you all the details of what this upgrade entails with regards to the packages available, and will point out any issues with package versions and so on.

Assuming the results of the check look good, you can simply do an upgrade next. 

$ owut upgrade --verbose --version-to 25.12
... even more output ...

If you are unsure of anything you see in the check, during the upgrade, or simply have questions, jump on over to the owut support thread on the forum and ask.

Known issues

Final notes

As always, a big thank you goes to all our active package maintainers, testers, documenters, and supporters.

Have fun!

The OpenWrt Community