Show available package upgrades after SSH login

If you would like a simple way to view packages with available upgrades when you login via ssh (this will have no effect when you login to LuCI), you can achieve this with two simple steps:

1. Create a user profile script that checks the package list for upgradable packages
2. Schedule “opkg update” with crontab to keep the package lists up-to-date,

Or simply integrate the update check in the user profile script so everything is run on login.

When this is running, you will see the following when you login via ssh:

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 18.06.1, r7258-5eb055306f
 -----------------------------------------------------

151 packages are installed.
4 packages can be upgraded.

root@OpenWrt:~#

You may then choose to upgrade one or several packages, or all packages in one command.

To create the user profile script, you need to be logged-in as root via SSH. This example uses nano as the text editor (since it is a bit easier to use as the system default text editor vim), but you can of course create the script with the editor of your choice.

nano ~/.profile

#!/bin/sh

opkgInstalled="$(opkg list-installed 2> /dev/null | wc -l)" #silencing error output
opkgUpgradable="$(opkg list-upgradable 2> /dev/null | wc -l)" #silencing error output

echo "$opkgInstalled packages are installed." && echo "$opkgUpgradable packages can be upgraded." && echo

For the above script to work, the package lists must be available and up-to-date at login time. Updating the packages list can be automated in three ways:

1. in regular intervalls → crontab
2. at each startup / booting → startup script
3. on login → using the same profile script

Keep in mind that this will occupy precious RAM space on low memory devices (16+32MB). See the third method for a low-ram-friendly script.

Schedule crontab to “opkg update” once per week, either via LuCI or via commandline.

• via LuCI: Add below lines via LuCi > System > Scheduled Tasks
• via command line: crontab -e → add below lines

1 0 * * 0 /bin/opkg update # Update list of available packages every Sunday 00:01
# crontab and fstab must end with the last line a space or comment

You can change the interval as you like, but keep in mind that every interval below 24h is a waste of resources, since release packages do not get compiled that often.

This method only works if you frequently reboot your hardware. Keep in mind that this will occupy precious RAM space on low memory devices (16+32MB). See the third method for a low-ram-friendly script.

If you prefer to run “opkg list” only once at startup, rather than in regular intervals as shown above, you can do so by means of the startup script rc.local.

• via LuCI: Add below lines via LuCi > System > Startup > Local Startup
• via commandline: edit etc/rc.local and add below lines

/bin/opkg update # Update list of available packages
exit 0

Now everytime you login with Dropbear (SSH) you will see the number of total packages installed and how many packages can be upgraded.

You can place the updating commands in the same profile file, as that script is executed each time the user logs in with ssh or serial console.

The main drawback is that the user will have to wait a few seconds for the update to finish before they can start writing commands, which if all goes well is just a few seconds. It will be quite a bit more if there is no internet access, as opkg will take a while to figure out that there is no internet connection. So a check for internet connectivity is included. If no internet is detected the update is skipped.
For the sake of being low-RAM friendly, there is a check that deletes automatically the package lists if the device has less then 32 MiB of free RAM.

This is the whole .profile script:

nano ~/.profile

#!/bin/sh

if wget -q --spider https://openwrt.org/; then  # if OpenWrt website/wiki is available we update
  echo "You are connected to the internet. Checking for updates, please wait..." && echo
  opkg update > /dev/null 2>&1 #silenced standard output and error output

  opkgInstalled="$(opkg list-installed 2> /dev/null | wc -l)" #silencing error output
  opkgUpgradable="$(opkg list-upgradable 2> /dev/null | wc -l)" #silencing error output

  echo "$opkgInstalled packages are installed." && echo "$opkgUpgradable packages can be upgraded." && echo
  
  memLimit=32000 # in bytes
  if [ "$(grep MemFree /proc/meminfo | awk '{print$2}')" -lt $memLimit ]; then
    for opkg_package_lists in /var/opkg-lists/*
    do
      if [ -f "$opkg_package_lists" ]; then #prevent error if opkg update fails
        rm -r /var/opkg-lists/*
        echo "Warning: Memory limit $memLimit bytes. Removed downloaded package lists to save memory."
        echo #only remove when free RAM is less than set memory limit (default 32 MiB)
      fi
    done
  fi
  else
  echo "You are not connected to the internet. Unable to check for updates." && echo
fi

By default, firmware upgrade procedure does not back up /root/.profile so we need to add it to the list of custom files to back up.

echo  '/root/.profile #my profile with update script '  >> /etc/sysupgrade.conf

Other files created or modified by this tutorial (chrontabs and /etc/rc.local) are already in the whitelist of files preserved.

For more information, please check the Upgrading OpenWrt from the Command Line

opkg upgrade package_name allow upgrading one package. To upgrade all packages, follow check_for_any_upgradable_packages.

Note that package upgrades are processed without order and be sure to have sufficient space on your device. Automating OpenWrt package upgrades is strongly discouraged, unless you manage a central repository and push upgrades from there.

If you have a better way of doing this, please update this user guide. You can also add the above script to “/etc/profile” which is the system default, but you are better off keeping that untouched as to prevent issues.

Enjoy!