[12:06] <CIA-17> florian * r4473 /packages/utils/mutt/ (. Config.in Makefile ipkg/): Port mutt to -ng
[12:39] <CIA-17> florian * r4474 /packages/ipv6/ (7 files in 4 dirs): Move dhcp6, mrd6 and 6tunnel to ipv6 section
[12:42] <CIA-17> kaloz * r4475 /branches/buildroot-ng/openwrt/ (9 files in 9 dirs): add XScale support to -ng
[12:44] Action: Kaloz pokes common
[12:44] <Kaloz> :P
[12:44] Action: nbd starts building an xscale image ... :)
[12:47] <Bartman007> cool, xscale in ng!
[12:47] <Bartman007> Kaloz: works out quite well since it appears that xscale in trunk is broken
[12:48] <Kaloz> well, worked for me, but this works for sure
[12:48] <Kaloz> running it on the gateway
[12:48] <groz_> which hardware is it specifically for ?
[12:48] <Kaloz> Bartman007: do you want binaries to check the wlan card now?
[12:48] <Kaloz> groz_: gateway 7001
[12:48] <Kaloz> groz_: quite expensive at gateway, insanely cheap on ebay
[12:48] <Kaloz> :)
[12:49] <Bartman007> Kaloz: I tried making images from snapshots several weeks apart, and neither worked
[12:49] <Bartman007> Kaloz: yeah, that would be nice... I'll try some ng images also
[12:49] <Kaloz> just a sec
[12:50] <Bartman007> though I think it may have just been me loading the images onto the router wrong... since it would never get past RedBoot executing the kernel
[12:54] <CIA-17> florian * r4476 /packages/utils/nano/ (. Config.in Makefile ipkg/): Port nano to -ng
[12:55] <Kaloz> Bartman007: http://kaloz.rulez.org/files/openwrt-xscale-2.6-jffs2-128k.img and http://kaloz.rulez.org/files/openwrt-xscale-2.6-zImage
[12:55] <Bartman007> thanks. would you happen to have a .config handle also for reference?
[12:55] <Bartman007> s/handle/handy/
[12:56] <CIA-17> florian * r4477 /packages/ipv6/ndisc/ (. Config.in Makefile ipkg/): Port ndisc to -ng
[12:56] <Kaloz> i used the standard ones (the one supplied for kernel, and the one generated by buildroot-ng)
[12:56] <Bartman007> heh, I haven't even used subversion on ths laptop yet, gottem emerge it :-)
[12:57] <Bartman007> Kaloz: ok, I'll report back in the next few days when I get time
[12:57] <Kaloz> Bartman007: sec
[12:58] <Bartman007> Kaloz: also for reference, do you happen to remember what revision of the repository those files are made from?
[13:00] <Kaloz> current one :) so r4475
[13:00] <Kaloz> Bartman007: http://wiki.openwrt.org/OpenWrtDocs/Hardware/Gateway/7001
[13:00] <Bartman007> k
[13:00] <Kaloz> i've put the flashing method on the end of the page
[13:01] <Bartman007> I found that I had to specify a base address when writing my images to flash, otherwise they didn't take
[13:02] <Bartman007> maybe that screwed things up
[13:02] <Kaloz> you don't have to speficy, if you don't delete the existing partitions
[13:02] <Bartman007> I didn't delete the existing partitons, I mean specify the base address of the file that was uploaded.
[13:03] <CIA-17> florian * r4478 /packages/net/ (7 files in 5 dirs): Port netperf to -ng
[13:04] <Bartman007> subversion should be almost done compiling, I'll get the toolchain built while I'm sleeping (nearly 4AM here)
[13:04] <Kaloz> Bartman007: should be working the way i've posted, maybe you forgot -r or -b %{FREEMEMLO}
[13:05] <Bartman007> lemme check my notes.
[13:06] <Bartman007> nah, I was using both -r and -b with the load command, but I had to use fi cr -b 0x0001c400 <partiton name> (the -b probably screwed me up, but it wouldn't work with the images I built otherwise)
[13:14] <CIA-17> florian * r4479 /packages/net/netstat-nat/ (. Config.in Makefile ipkg/): Port netstat-nat to -ng
[13:46] <CIA-17> florian * r4480 /packages/net/tcp_wrappers/ (. Config.in Makefile): Port tcp_wrappers to -ng
[13:48] <CIA-17> florian * r4481 /packages/net/portmap/ (. Config.in Makefile ipkg/): Port portmap to -ng
[13:48] <CIA-17> florian * r4482 /packages/net/nfs-server/ (. Config.in Makefile ipkg/): Port nfs-server to -ng
[14:15] <CIA-17> florian * r4483 /packages/net/nmap/ (. Config.in Makefile ipkg/): Port nmap to -ng
[14:36] <CIA-17> florian * r4484 /packages/net/nocatsplash/ (. Config.in Makefile ipkg/): Port nocatsplash to -ng
[14:40] <CIA-17> florian * r4485 /packages/net/ntpclient/ (. Config.in Makefile ipkg/): Port ntpclient to -ng
[14:42] <CIA-17> florian * r4486 /packages/net/nocatsplash/Makefile: Add missing conffiles section
[14:53] <CIA-17> florian * r4487 /packages/net/openntpd/ (. Config.in Makefile ipkg/): Port openntpd to -ng
[15:04] <CIA-17> florian * r4488 /packages/admin/osiris/ (. Config.in Makefile ipkg/): Port osiris to -ng
[15:16] <CIA-17> florian * r4489 /packages/multimedia/palantir/ (. Config.in Makefile ipkg/): Port palantir to -ng
[16:27] <CIA-17> florian * r4490 /packages/net/parprouted/ (. Config.in Makefile ipkg/): Port parprouted to -ng
[16:50] <CIA-17> florian * r4491 /packages/multimedia/peercast/ (. Config.in Makefile ipkg/): Port peercast to -ng
[16:56] <florian_> have to come back to paris, see you later
[18:43] <Rezso> any news on atheros port ?
[00:00] --- Mon Aug 7 2006
[12:39] <CIA-17> florian * r4474 /packages/ipv6/ (7 files in 4 dirs): Move dhcp6, mrd6 and 6tunnel to ipv6 section
[12:42] <CIA-17> kaloz * r4475 /branches/buildroot-ng/openwrt/ (9 files in 9 dirs): add XScale support to -ng
[12:44] Action: Kaloz pokes common
[12:44] <Kaloz> :P
[12:44] Action: nbd starts building an xscale image ... :)
[12:47] <Bartman007> cool, xscale in ng!
[12:47] <Bartman007> Kaloz: works out quite well since it appears that xscale in trunk is broken
[12:48] <Kaloz> well, worked for me, but this works for sure
[12:48] <Kaloz> running it on the gateway
[12:48] <groz_> which hardware is it specifically for ?
[12:48] <Kaloz> Bartman007: do you want binaries to check the wlan card now?
[12:48] <Kaloz> groz_: gateway 7001
[12:48] <Kaloz> groz_: quite expensive at gateway, insanely cheap on ebay
[12:48] <Kaloz> :)
[12:49] <Bartman007> Kaloz: I tried making images from snapshots several weeks apart, and neither worked
[12:49] <Bartman007> Kaloz: yeah, that would be nice... I'll try some ng images also
[12:49] <Kaloz> just a sec
[12:50] <Bartman007> though I think it may have just been me loading the images onto the router wrong... since it would never get past RedBoot executing the kernel
[12:54] <CIA-17> florian * r4476 /packages/utils/nano/ (. Config.in Makefile ipkg/): Port nano to -ng
[12:55] <Kaloz> Bartman007: http://kaloz.rulez.org/files/openwrt-xscale-2.6-jffs2-128k.img and http://kaloz.rulez.org/files/openwrt-xscale-2.6-zImage
[12:55] <Bartman007> thanks. would you happen to have a .config handle also for reference?
[12:55] <Bartman007> s/handle/handy/
[12:56] <CIA-17> florian * r4477 /packages/ipv6/ndisc/ (. Config.in Makefile ipkg/): Port ndisc to -ng
[12:56] <Kaloz> i used the standard ones (the one supplied for kernel, and the one generated by buildroot-ng)
[12:56] <Bartman007> heh, I haven't even used subversion on ths laptop yet, gottem emerge it :-)
[12:57] <Bartman007> Kaloz: ok, I'll report back in the next few days when I get time
[12:57] <Kaloz> Bartman007: sec
[12:58] <Bartman007> Kaloz: also for reference, do you happen to remember what revision of the repository those files are made from?
[13:00] <Kaloz> current one :) so r4475
[13:00] <Kaloz> Bartman007: http://wiki.openwrt.org/OpenWrtDocs/Hardware/Gateway/7001
[13:00] <Bartman007> k
[13:00] <Kaloz> i've put the flashing method on the end of the page
[13:01] <Bartman007> I found that I had to specify a base address when writing my images to flash, otherwise they didn't take
[13:02] <Bartman007> maybe that screwed things up
[13:02] <Kaloz> you don't have to speficy, if you don't delete the existing partitions
[13:02] <Bartman007> I didn't delete the existing partitons, I mean specify the base address of the file that was uploaded.
[13:03] <CIA-17> florian * r4478 /packages/net/ (7 files in 5 dirs): Port netperf to -ng
[13:04] <Bartman007> subversion should be almost done compiling, I'll get the toolchain built while I'm sleeping (nearly 4AM here)
[13:04] <Kaloz> Bartman007: should be working the way i've posted, maybe you forgot -r or -b %{FREEMEMLO}
[13:05] <Bartman007> lemme check my notes.
[13:06] <Bartman007> nah, I was using both -r and -b with the load command, but I had to use fi cr -b 0x0001c400 <partiton name> (the -b probably screwed me up, but it wouldn't work with the images I built otherwise)
[13:14] <CIA-17> florian * r4479 /packages/net/netstat-nat/ (. Config.in Makefile ipkg/): Port netstat-nat to -ng
[13:46] <CIA-17> florian * r4480 /packages/net/tcp_wrappers/ (. Config.in Makefile): Port tcp_wrappers to -ng
[13:48] <CIA-17> florian * r4481 /packages/net/portmap/ (. Config.in Makefile ipkg/): Port portmap to -ng
[13:48] <CIA-17> florian * r4482 /packages/net/nfs-server/ (. Config.in Makefile ipkg/): Port nfs-server to -ng
[14:15] <CIA-17> florian * r4483 /packages/net/nmap/ (. Config.in Makefile ipkg/): Port nmap to -ng
[14:36] <CIA-17> florian * r4484 /packages/net/nocatsplash/ (. Config.in Makefile ipkg/): Port nocatsplash to -ng
[14:40] <CIA-17> florian * r4485 /packages/net/ntpclient/ (. Config.in Makefile ipkg/): Port ntpclient to -ng
[14:42] <CIA-17> florian * r4486 /packages/net/nocatsplash/Makefile: Add missing conffiles section
[14:53] <CIA-17> florian * r4487 /packages/net/openntpd/ (. Config.in Makefile ipkg/): Port openntpd to -ng
[15:04] <CIA-17> florian * r4488 /packages/admin/osiris/ (. Config.in Makefile ipkg/): Port osiris to -ng
[15:16] <CIA-17> florian * r4489 /packages/multimedia/palantir/ (. Config.in Makefile ipkg/): Port palantir to -ng
[16:27] <CIA-17> florian * r4490 /packages/net/parprouted/ (. Config.in Makefile ipkg/): Port parprouted to -ng
[16:50] <CIA-17> florian * r4491 /packages/multimedia/peercast/ (. Config.in Makefile ipkg/): Port peercast to -ng
[16:56] <florian_> have to come back to paris, see you later
[18:43] <Rezso> any news on atheros port ?
[00:00] --- Mon Aug 7 2006